ZyXEL G-560 User’s Guide
B-8 Setting Up Your Computer’s IP Address
7.
In the Internet Protocol TCP/IP Properties window
(the General tab in Windows XP):
-Click Obtain DNS server address automatically if
you do not know your DNS server IP address(es).
-If you know your DNS server IP address(es), click
Use the following DNS server addresses, and
type them in the Preferred DNS server and
Alternate DNS server fields.
If you have previously configured DNS servers, click
Advanced and then the DNS tab to order them.
8.
Click OK to close the Internet Protocol (TCP/IP) Properties window.
9.
Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window.
10.
Close the Network Connections window (Network and Dial-up Connections in Windows
2000/NT).
11. Turn on your G-560 and restart your computer (if prompted).
Verifying Your Computer’s IP Address
1.
Click Start, All Programs, Accessories and then Command Prompt.
2.
In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections, right-click a network connection, click Status and then click the Support tab.
Macintosh OS 8/9
To Next Page
Loading...
