ZyXEL G-560 User’s Guide
3-6 Introducing the web configurator
3.2.3 Security Settings
Fill in the fields in the third wizard configuration screen. The screen varies depending on what you select in
the Encryption Method field. Select Disable to have no wireless security configured, select WEP, or select
WPA-PSK if your wireless clients support WPA-PSK. Go to SETTINGS, WIRELESS and Security if you
want WPA or 802.1x. See the Wireless Screens chapter for background information.
Disable
Select Disable to have no wireless LAN security configured. If you do not enable any wireless security on
your G-560, your network is accessible to any wireless networking device that is within range.
With no wireless security a neighbor can access and see traffic in your network.
Figure 3-6 Setup Wizard 3: Disable
WEP
1. WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless network.
Select 64-bit, 128-bit or 256-bit from the WEP Encryption drop-down list box and then follow the
on-screen instructions to set up the WEP keys.
2. Choose an encryption level from the drop-down list. The higher the WEP Encryption, the higher the
security but the slower the throughput.
3. You can generate or manually enter a WEP key by either
• Entering a Passphrase (up to 32 printable characters) and clicking Generate. The G-560
automatically generates a WEP key.
or
To Next Page
Loading...
