ZyXEL G-560 User’s Guide
7-6 Management Screens
Figure 7-5 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer to be
in the same subnet as that of the default G-560 IP address (192.168.1.2).
If the upload was not successful, the following screen will appear. Click Return to go back to the
Configuration File screen.
Figure 7-6 Configuration Upload Error
7.4.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and returns the G-
560 to its factory defaults as shown on the screen. The following warning screen will appear.
To Next Page
Loading...
