ZyXEL G-560 User’s Guide
Management Screens 7-7
Figure 7-7 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your G-560. Refer to
the section on resetting the G-560 for more information on the RESET button.
7.5 F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a .bin extension,
for example, "zyxel.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to
two minutes. After a successful upload, the system will reboot.
Click SETTINGS, MANAGEMENT and then the F/W Upload tab to display the screen as shown. Follow
the instructions in this screen to upload firmware to your G-560.
To Next Page
Loading...
