ZyXEL G-560 User’s Guide
Management Screens 7-3
Table 7-2 Logs
LABEL DESCRIPTION
Display Select a category of logs to view.
# This is the log’s index number.
Time This field displays the time the log was recorded.
Message This field states the reason for the log.
Source This field lists the source IP address and the port number of the incoming packet that
caused the log.
Destination This field lists the destination IP address and the port number of the outgoing packet
that caused the log.
Note This field displays additional information about the log entry.
Refresh
Click Refresh to renew the log screen.
Clear Log
Click Clear Log to clear all the logs.
7.4 Configuration Screen
The configuration file (often called the romfile or rom-0) contains the factory default settings such as
password and TCP/IP Setup, etc. It arrives from ZyXEL with a .rom filename extension. Once you have
customized the G-560's settings, they can be saved back to your computer under a filename of your choosing.
Click SETTINGS, MANAGEMENT and then the Configuration File tab. Information related to factory
defaults, backup configuration, and restoring configuration appears as shown next.
To Next Page
Loading...
