ZyXEL Communications G-570S - Table 4 Screens Summary; Navigation Panel

Chapter 4 Navigating the Advanced Screens
ZyXEL G-570S User’s Guide
46
4.0.1 Navigation Panel
After you enter the password, use the links on the navigation panel to go to the various
advanced screens.
The following table describes the sub-menus.
" See the rest of this User's Guide for configuration details and background
information on all features using the web configurator.
Table 4 Screens Summary
LINK TAB FUNCTION
Status This screen shows the ZyXEL Device’s general device, system and
interface status information. Use this screen to access the wizard, and
summary statistics tables.
System Use this screen to configure the device name and IP address assignment
settings.
Wireless Wireless
Settings
Use this screen to configure the wireless LAN.
Security Use this screen to configure the wireless LAN’s security settings.
MAC Filter Use the MAC filter screen to configure the ZyXEL Device to block or allow
only certain devices to associate with the ZyXEL Device.
OTIST When the ZyXEL Device is in access point mode, this screen allows you to
assign wireless clients the ZyXEL Device’s wireless security settings.
When the ZyXEL Device is in wireless client mode, this screen allows the
ZyXEL Device to get security settings from an OTIST-enabled access point.
Management Password Use this screen to configure the administrator password.
Logs Use this screen to view logs and alert messages.
Configuration Use this screen to backup and restore the configuration or reset the factory
defaults to your ZyXEL Device.
F/W Upload Use this screen to upload firmware to your ZyXEL Device.