Chapter 5 Status Screens
ZyXEL G-570S User’s Guide
48
5.1.1 Statistics
Click View Statistics in the Status screen. This screen displays read-only information
including port status and packet specific statistics. Also provided are "system up time" and
"poll interval(s)". The Poll Interval(s) field is configurable.
MAC Address This field displays the MAC address of the device.
The MAC (Media Access Control) or Ethernet address on a LAN (Local Area
Network) is unique to your computer. A network interface card such as an Ethernet
adapter has a hardwired address that is assigned at the factory. This address
follows an industry standard that ensures no other adapter has a similar address.
Firmware
Version
This is the firmware version and the date the firmware was created.
IP Settings
IP Address This is the Ethernet port IP address.
Subnet Mask This is the Ethernet port subnet mask.
Gateway IP
Address
This is the IP address of a gateway. Leave this field as 0.0.0.0 if you do not know
it.
Wireless Settings
SSID This is the descriptive name used to identify the device in a wireless network.
Channel This field displays the radio channel the device is currently using.
Encryption
Method
This field shows the type of data encryption that is enabled on the wireless
network:
WEP (WEP or 802.1x)
TKIP (WPA or WPA-PSK)
AES (WPA2 or WPA2-PSK)
TKIP + AES (WPA & WPA2 or WPA-PSK & WPA2-PSK)
or
Disable (no security)
MAC Filter This field shows whether MAC filter is enabled or not. With MAC filtering, you can
allow or deny access to the device based on the MAC addresses of the wireless
stations.
View Statistics Click View Statistics to see performance statistics such as number of packets
sent and number of packets received.
View Association
List
Click View Association List to show the wireless stations that are currently
associated to the device.
Table 5 Status
LABEL DESCRIPTION
To Next Page
Loading...
