Chapter 31 Configuration: AAA
GS1900 Series User’s Guide
210
Fig ure 209 Configuration > AAA > Auth Method > Add or Edit
The following table describes the labels in this screen.
31.3 RADIUS
31.3.1 The RADIUS Sc re e n
Use this screen to configure the RADIUS settings. Click Co nfig ura tion > AAA > RADIUS to open this screen.
Fig ure 210 Configuration > AAA > RADIUS
The following table describes the labels in this screen.
Table 157 Configuration > AAA > Auth Method > Add or Edit
LABEL DESCRIPTIO N
Auth Method
Name Enter the authentication method name. The name can be between 1 and 31 ASCII
Alphanumeric Characters.
Method 1 Select the first authentication method as being Lo c a l, Ra dius, or TAC AC S+.
Method 2 Select the second authentication method as being Emp ty, Lo c a l, Ra dius, or TAC AC S+.
Method 3 Select the third authentication method as being Em pty, Lo c a l, Ra dius, or TAC AC S+.
Apply Click A pp ly to save the changes.
Cancel Click C a nc e l to discard the changes.
Table 158 Configuration > AAA > RADIUS
LABEL DESCRIPTIO N
RADIUS Servers
Server Displays the server names as an IP address or a domain name.
Auth Port Displays the authentication port numbers as a value between 0 and 65535.
Key Displays the authentication key.
Time out Displays the number of time outs for replies. The value can be between 1 and 30 seconds.
Retries Displays the number of retries. The value can be between 1 and 30.
To Next Page
Loading...
