ZyXEL Communications GS1920-24 - Multicast Setup

Chapter 23 Multicast
GS1920 Series User’s Guide
169
Figure 123 MVR Multicast Television Example
23.2 Multicast Setup
Use this screen to configure IGMP for IPv4 or MLD for IPv6 and set up multicast VLANs. Click
Advanced Application > Multicast in the navigation panel.
Figure 124 Advanced Application > Multicast Setup
The following table describes the labels in this screen.
23.3 IPv4 Multicast Status
Click Advanced Application > Multicast > IPv4 Multicast to display the screen as shown. This
screen shows the IPv4 multicast group information. See Section 23.1 on page 165 for more
information on multicasting.
Figure 125 Advanced Application > Multicast > IPv4 Multicast
SMulticast VLAN
VLAN 1
A
Table 70 Advanced Application > Multicast Setup
LABEL DESCRIPTION
IPv4 Multicast Click the link to open screens where you can configure IGMP snooping and IGMP filtering
for IPv4.
IPv6 Multicast Click the link to open screens where you can configure MLD snooping and MLD filtering for
IPv6.
MVR Click the link to open screens where you can create multicast VLANs.