Chapter 37 Maintenance
GS1920 Series User’s Guide
303
Figure 223 Management > Maintenance > Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File Path text box or
click Browse to locate it. After you have specified the file, click Restore. "config" is the name of
the configuration file on the Switch, so your backup configuration file is automatically renamed
when you restore using this screen.
37.5 Backup a Configuration File
Use this screen to save and store your current device settings.
Backing up your Switch configurations allows you to create various “snap shots” of your device from
which you may restore at a later date.
Back up your current Switch configuration to a computer using the Backup Configuration screen.
Figure 224 Management > Maintenance > Backup Configuration
Follow the steps below to back up the current Switch configuration to your computer in this screen.
1 Click Backup.
2 Click Save to display the Save As screen.
3 Choose a location to save the file on your computer from the Save in drop-down list box and type
a descriptive name for it in the File name list box. Click Save to save the configuration file to your
computer.
37.6 Tech-Support
The Tech-Support feature is a log enhancement tool that logs useful information such as CPU
utilization history, memory and Mbuf (Memory Buffer) log and crash reports for issue analysis by
customer support should you have difficulty with your Switch. Click Menu > Management >
Maintenance > Tech-Support to see the following screen.
To Next Page
Loading...
