Chapter 23 Multicast
GS1920 Series User’s Guide
187
23.6.2 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the Switch belong to VLAN
1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the
News and Movie channels) from the remote streaming media server, S. Computers A, B and C in
VLAN 1 are able to receive the traffic.
Figure 137 MVR Configuration Example
To configure the MVR settings on the Switch, create a multicast VLAN in the MVR screen and set
the receiver and source ports.
Figure 138 MVR Configuration Example
S
Multicast VID 200
VLAN 1
A
B
C
News: 224.1.4.10 ~ 224.1.4.50
1
Movie: 230.1.2.50 ~230.1.2.60
2
3
7
To Next Page
Loading...
