ZyXEL Communications GS1920-24 - Access Control; Chapter 38 Access Control; Access Control Overview; What You Can Do

GS1920 Series User’s Guide
308
CHAPTER 38
Access Control
38.1 Access Control Overview
This chapter describes how to control access to the Switch.
One FTP session, up to five Web sessions (five different user names and passwords) and/or limitless
SNMP access control sessions are allowed.
38.1.1 What You Can Do
• Use the Access Control screen (Section 38.2 on page 308) to display the main screen.
• Use the SNMP screen (Section 38.3 on page 309) to configure your SNMP settings.
• Use the Trap Group screen (Section 38.3.1 on page 310) to specify the types of SNMP traps that
should be sent to each SNMP manager.
• Use the User Information screen (Section 38.3.3 on page 312) to create SNMP users for
authentication with managers using SNMP v3 and associate them to SNMP groups.
• Use the Logins screens (Section 38.4 on page 314) to assign which users can access the Switch
via web configurator at any one time.
• Use the Service Access Control screen (Section 38.5 on page 315) to decide what services you
may use to access the Switch.
• Use the Remote Management screen (Section 38.6 on page 316) to specify a group of one or
more “trusted computers” from which an administrator may use a service to manage the Switch.
38.2 The Access Control Main Screen
Use this screen to display the main screen.
Click Management > Access Control in the navigation panel to display the main screen as
shown.
Table 152 Access Control Overview
FTP Web SNMP
One session Up to five accounts No limit