ZyXEL Communications GS2200-24 Series - TACACS+ Server Setup

Chapter 24 AAA
GS2200-24/24P User’s Guide
213
24.4 TACACS+ Server Setup
Use this screen to configure your TACACS+ server settings. See Section on page
210 for more information on TACACS+ servers. Click on the TACACS+ Server
Setup link in the AAA screen to view the screen as shown.
Figure 113 Advanced Application > AAA > TACACS+ Server Setup
The following table describes the labels in this screen.
Table 61 Advanced Application > AAA > TACACS+ Server Setup
LABEL DESCRIPTION
Authentication
Server
Use this section to configure your TACACS+ authentication settings.
Mode This field is only valid if you configure multiple TACACS+ servers.
Select index-priority and the Switch tries to authenticate with the first
configured TACACS+ server, if the TACACS+ server does not respond
then the Switch tries to authenticate with the second TACACS+ server.
Select round-robin to alternate between the TACACS+ servers that it
sends authentication requests to.