Chapter 8 Basic Setting
GS2200-24/24P User’s Guide
81
8.6.1 Management IP Addresses
The Switch needs an IP address for it to be managed over the network. The
factory default IP address is 192.168.1.1. The subnet mask specifies the network
number portion of an IP address. The factory default subnet mask is
255.255.255.0.
You can configure up to 64 IP addresses which are used to access and manage the
Switch from the ports belonging to the pre-defined VLAN(s).
Note: You must configure a VLAN first.
Figure 42 Basic Setting > IP Setup
To Next Page
Loading...
