EasyManua.ls Logo

ZyXEL Communications MGS-3712F - 9.9 Configuring Protocol Based VLAN

ZyXEL Communications MGS-3712F
382 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 9 VLAN
MGS-3712/MGS-3712F User’s Guide
108
for ARP traffic received on port 1, 2 and 3. You also have a protocol based VLAN B
with priority 2 for Apple Talk traffic received on port 6 and 7. All upstream ARP
traffic from port 1, 2 and 3 will be grouped together, and all upstream Apple Talk
traffic from port 6 and 7 will be in another group and have higher priority than ARP
traffic, when they go through the uplink port to a backbone switch C.
Figure 55 Protocol Based VLAN Application Example
9.9 Configuring Protocol Based VLAN
Click Protocol Based VLAN in the VLAN Port Setting screen to display the
configuration screen as shown.
Note: Protocol-based VLAN applies to un-tagged packets and is applicable only when
you use IEEE 802.1Q tagged VLAN.
Figure 56 Advanced Application > VLAN > VLAN Port Setting > Protocol Based
VLAN

Table of Contents

Related product manuals