Chapter 24 Multicast
MGS-3712/MGS-3712F User’s Guide
215
for the multicast traffic. Otherwise, the Switch removes the receiver port from the
forwarding table.
Figure 110 MVR Multicast Television Example
24.7 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver port(s) and
a source port for each multicast VLAN. Click Advanced Applications >
Multicast > Multicast Setting > MVR link to display the screen as shown next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the
Switch.
To Next Page
Loading...
