Chapter 24 Multicast
MGS-3712/MGS-3712F User’s Guide
207
24.3 Multicast Setting
Click Advanced Applications > Multicast > Multicast Setting link to display
the screen as shown. See Section 24.1 on page 205 for more information on
multicasting.
Figure 106 Advanced Application > Multicast > Multicast Setting
The following table describes the labels in this screen.
Table 60 Advanced Application > Multicast > Multicast Setting
LABEL DESCRIPTION
IGMP Snooping Use these settings to configure IGMP Snooping.
Active Select Active to enable IGMP Snooping to forward group multicast
traffic only to ports that are members of that group.
Querier Select this option to allow the Switch to send IGMP General Query
messages to the VLANs with the multicast hosts attached.
To Next Page
Loading...
