ZyXEL Communications MGS-3712F - Page 309

Chapter 34 Access Control
MGS-3712/MGS-3712F User’s Guide
309
voltage VoltageEventOn MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.2
5.2.1
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.2
5.2.1
This trap is sent when the
voltage goes above or below
the normal operating range.
VoltageEventClear MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.2
5.2.2
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.2
5.2.2
This trap is sent when the
voltage returns to the normal
operating range.
reset UncontrolledResetEventOn MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.2
5.2.1
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.2
5.2.1
This trap is sent when the
Switch automatically resets.
ControlledResetEventOn MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.2
5.2.1
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.2
5.2.1
This trap is sent when the
Switch resets by an
administrator through a
management interface.
RebootEvent MGS-3712F:
1.3.6.1.4.1.890.1.5.0.1
MGS-3712:
1.3.6.1.4.1.890.1.5.0.1
This trap is sent when the
Switch reboots by an
administrator through a
management interface.
timesync RTCNotUpdatedEventOn MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.2
5.2.1
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.2
5.2.1
This trap is sent when the
Switch fails to get the time and
date from a time server.
RTCNotUpdatedEventClear MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.2
5.2.2
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.2
5.2.2
This trap is sent when the
Switch gets the time and date
from a time server.
intrusionloc
k
IntrusionLockEventOn MGS-3712F:
1.3.6.1.4.1.890.1.5.8.48.2
5.2.1
MGS-3712:
1.3.6.1.4.1.890.1.5.8.47.2
5.2.1
This trap is sent when intrusion
lock occurs on a port.
Table 103 SNMP System Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION