Chapter 8 Control Panel: Network
NAS Series User’s Guide
134
Figure 103 Control Panel > Network > TCP/IP > Network Interface > LAN1: IPv4
The following table describes the labels in this screen.
IPv6
Click IPv6 to configure the IPv6 settings.
Table 77 Control Panel > Network > TCP/IP > Network Interface > LAN1: IPv4
LABEL DESCRIPTION
Automatically Select this option to have the interface get IP address information automatically.
Manually Select this option for the interface to use fixed TCP/IP information.
• IP Address - Type an IP address in this field.
• Subnet Mask - Type an IP subnet mask in this field.
• Default Gateway - Type a default gateway address in this field.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
To Next Page
Loading...
