NBG-418N v2 User’s Guide
143
CHAPTER 20
Tools
20.1 Overview
This chapter shows you how to upload a new firmware, upload or save backup configuration files
and restart the NBG-418N v2.
20.2 What You Can Do
•Use the Firmware screen to upload firmware to your NBG-418N v2 (Section 20.3 on page 143).
•Use the Configuration screen to view information related to factory defaults, backup
configuration, and restoring configuration (Section 20.4 on page 145).
•Use the Restart screen to have the NBG-418N v2 reboot (Section 20.5 on page 147).
20.3 Firmware Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “NBG-418N v2.bin”. The upload process uses HTTP (Hypertext Transfer Protocol)
and may take up to two minutes. After a successful upload, the system will reboot.
Click Maintenance > Tools. Follow the instructions in this screen to upload firmware to your NBG-
418N v2.
Figure 104 Maintenance > Tools > Firmware
To Next Page
Loading...
