Chapter 4 Modes
NBG-418N v2 User’s Guide
44
4.5.2 Universal Repeater Navigation Panel
Use the menu in the navigation panel to configure NBG-418N v2 features in Client Bridge Mode.
The following screen and table show the features you can configure in Client Bridge Mode.
Figure 30 Menu: Client Bridge Mode
Firmware Version This is the current firmware version of the NBG-418N v2.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP Server This shows the status of the LAN port’s DHCP server.
WLAN STA Information
- SSID This is the name of the selected AP that the NBG-418N v2 is associating with.
- Security Mode This shows the wireless security the NBG-418N v2 is using to connect to the
AP.
- Connection Status This shows whether the NBG-418N v2 is currently associated with the selected
AP.
System Status
Operation Mode This field shows the device operating mode: Router, Access Point, Universal
Repeater or Client Bridge.
System Up Time This is the total time the NBG-418N v2 has been on.
Current Date/Time This field displays your NBG-418N v2’s present date and time.
Summary
Client Table Use this screen to view information of the client that is currently connected to
the NBG-418N v2’s Ethernet LAN port.
Packet Statistics Use this screen to view port status and packet specific statistics.
Table 16 Status Screen (Client Bridge Mode) (continued)
LABEL DESCRIPTION
To Next Page
Loading...
