Chapter 2 The Web Configurator
NBG-418N v2 User’s Guide
17
Figure 4 Login Screen
5 You should see a screen asking you to change your password (highly recommended) as shown
next. Type a new password. Click Apply to save your changes. Click Ignore if you do not want to
change the password this time.
Figure 5 Change Password Screen
Note: The management session automatically times out when the time period set in the
Administrator Inactivity Timer field expires (default five minutes). Simply log
back into the NBG-418N v2 if this happens.
6 Select the setup type you want to use.
• Click Go to Wizard Setup to use the Configuration Wizard for basic Internet and Wireless
setup.
• Click Go to Advanced Setup to view and configure all the NBG-418N v2’s settings.
• Select a language to go to the basic Web Configurator in that language. To change to the
advanced configurator see Chapter 22 on page 150.
To Next Page
Loading...
