ZyXEL Communications NBG-418N - Page 82

Chapter 7 WAN
NBG-418N v2 User’s Guide
82
This screen displays when you select PPTP encapsulation.
Figure 58 Network > WAN > Internet Connection: PPTP Encapsulation
The following table describes the labels in this screen.
Table 33 Network > WAN > Internet Connection: PPTP Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Connection Type To configure a PPTP client, you must configure the User Name and Password fields for a
PPP connection and the PPTP parameters for a PPTP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Server IP
Address
Type the IP address of the PPTP server.
DNS Servers
Attain DNS
Automatically/
Set DNS
Manually
Click Attain DNS Automatically radio button if your ISP dynamically assigns DNS server
information (and the NBG-418N v2’s WAN IP address). Or click Set DNS Manually if you
have if you have the IP address of a DNS server.
First DNS
Server
Second DNS
Server
Enter the first and second DNS server's IP address in the box fields.
WAN MAC Address
The MAC address section allows users to configure the WAN port's MAC address by either using the NBG-418N
v2’s MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC
address.
Factory default Select this option to use the factory assigned default MAC Address.