Chapter 7 Broadband
NR/FWA Indoor Series User’s Guide
118
7.11.1 Send New Message Screen
Use this screen to send an SMS message from the Zyxel Device. Go to Network Setting > Broadband >
Cellular SMS and click Add New Message to view this screen.
Figure 67 Network Setting > Broadband > Cellular SMS: Send New Message
The following table describes the fields in this screen.
Time Stamp This displays the time and date that the Zyxel Device received the message.
Content This displays the content of the message.
Modify This allows you to delete the message.
Table 31 Network Setting > Broadband > Cellular SMS (continued)
LABEL DESCRIPTION
Table 32 Network Setting > Broadband > Cellular SMS: Send New Message
LABEL DESCRIPTION
Character Set Select whether you want to send the SMS message using GSM-7 encoding or
unicode.
• GSM default alphabet: Use standard ASCII numbers, letters, and special
characters. The maximum length of the message is 140 characters.
• Unicode alphabet: Use any non-English Unicode characters. The maximum
length of the message is 70 characters.
Mobile Number Specify the cellphone number that you want to send the message to.
Text Message Specify the content of the message.
OK Click this button to send the message.
Cancel Click this button to close the window without sending the message.
To Next Page
Loading...
