Chapter 2 Hardware
NR/FWA Indoor Series User’s Guide
35
3 Press the WPS button on another WPS-enabled device that is within range of the Zyxel Device within 120
seconds.
After a WiFi connection is established, the WiFi/WPS LED blinks green.
2.6 How to Reset the Zyxel Device
Insert a thin object into the RESET hole of the Zyxel Device to reload the factory-default configuration file
if you forget your password or IP address, or you cannot access the Web Configurator. This means that
you will lose all configurations that you had previously saved. The password will be reset to the default
(see the Zyxel Device label) and the IP address will be reset to 192.168.1.1.
The following table shows the functions of the RESET button.
The following figure shows the RESET button on the Zyxel Device.
Figure 24 NR5101 RESET Button
Table 10 How to reset the Zyxel Device
RESET
BUTTON
FUNCTION NR5101 NR5103 NR5103E FWA510
RESET Reset the Zyxel Device Press for more
than 5 seconds
Press for more
than 5 seconds
Press for more
than 5 seconds
Press for more
than 5 seconds
RESET Reboot the Zyxel Device Press for 2-5
seconds
Press for 2-5
seconds
Press for 2-5
seconds
Press for 2-5
seconds
To Next Page
Loading...
