Chapter 8 Wireless
NR/FWA Indoor Series User’s Guide
121
Figure 68 Network Setting > Wireless > General
The following table describes the general WiFi labels in this screen.
Table 33 Network Setting > Wireless > General
LABEL DESCRIPTION
Wireless/WiFi Network Setup
Band This shows the WiFi band which this radio profile is using. 2.4GHz is the frequency used by IEEE
802.11b/g/n/ax WiFi clients, 5GHz is used by IEEE 802.11a/n/ac/ax WiFi clients.
Wireless/WiFi Click this switch to enable or disable WiFi in this field. When the switch turns blue, the function is
enabled. Otherwise, it is not.
Channel Select a channel from the drop-down list box. The options vary depending on the frequency
band and the country you are in.
Use Auto to have the Zyxel Device automatically determine a channel to use.
To Next Page
Loading...
