Chapter 5 Web Interface Tutorials
NR/FWA Indoor Series User’s Guide
71
4 Use the following fields to configure and apply a new ACL (Access Control List) rule.
• Filter Name: Enter a name to identify the firewall rule.
• Source IP Address: Enter the IP address of the computer that initializes traffic for the application or
service.
• Destination IP Address: Enter the IP address of the computer to which traffic for the application or
service is entering.
• Protocol: Select the protocol (ALL, TCP/UDP, TCP, UDP, ICMP or ICMPv6) used to transport the packets.
To Next Page
Loading...
