NWA / WAC Series User’s Guide
148
CHAPTER 14
System
14.1 Overview
Use the system screens to configure general NWA/WAC settings.
14.1.1 What You Can Do in this Chapter
•The Host Name screen (Section 14.2 on page 148) configures a unique name for the NWA/WAC in
your network.
• The Date/Time screen (Section 14.3 on page 149) configures the date and time for the NWA/WAC.
• The WWW screens (Section 14.4 on page 153) configure settings for HTTP or HTTPS access to the NWA/
WAC.
• The SSH screen (Section 14.5 on page 163) configures SSH (Secure SHell) for securely accessing the
NWA/WAC’s command line interface.
• The Telnet screen (Section 14.6 on page 167) configures Telnet for accessing the NWA/WAC’s
command line interface.
•The FTP screen (Section 14.7 on page 167) specifies FTP server settings. You can upload and
download the NWA/WAC’s firmware and configuration files using FTP. Please also see Chapter 16 on
page 185 for more information about firmware and configuration files.
• The SNMP screens (Section 14.8 on page 168) configure the device’s SNMP settings, including profiles
that define allowed SNMPv3 access.
14.2 Host Name
A host name is the unique name by which a device is known on a network. Click Configuration > System
> Host Name to open this screen.
Figure 91 Configuration > System > Host Name
To Next Page
Loading...
