What to do if I cannot access the Internet with my ZyXEL Communications Wireless Router?
First, check the ZyXEL Communications Wireless Router's connection to the cable or DSL device. If that doesn't work, unplug the power of both the Cable/DSL modem and the ZyXEL Communications Wireless Router, then plug them back in to reboot them. Also, verify your settings by clicking on WAN Port.
Wireless Specifications| power output at 54Mbps | 14.2 dBm |
|---|---|
| power output at 11Mbps | 18.4 dBm |
| receive sensitivity at 54Mbps | -70 dBm |
| receive sensitivity at 11Mbps | -86 dBm |
| antenna gain | 2 dBi |
Hardware Specifications| LAN ports | Four 10/100Base-T Ethernet, full duplex RJ-45 connector with auto MDI/MDIX support |
|---|---|
| WAN port | One 10/100Base-T Ethernet, full duplex RJ-45 connector with auto MDI/MDIX support |
| power supply | 12V AC, 800 mA |
Operating Environment| temperature range | -10℃ to 55℃ |
|---|---|
| humidity range | 10% to 90% non-condensing |
To Next Page
