Chapter 4 Status
WRE2206 User’s Guide
22
The following table describes the labels shown in the Status screen.
Select a number of seconds or None from the drop-down list box to refresh all
screen statistics automatically at the end of every time interval or to not refresh
the screen statistics.
Click this button to refresh the status screen statistics.
Table 7 Web Configurator Status Screen
LABEL DESCRIPTION
Device Information
System Name This is the System Name.
Firmware Version This is the current firmware version of the WRE2206.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP This shows the LAN port’s DHCP role.
WLAN Information
- MAC Address This shows the wireless adapter MAC Address of your device.
- Status This shows the current status of the Wireless LAN - On or Off.
- Name (SSID) This shows a descriptive name used to identify the WRE2206 in the wireless
LAN.
- Channel This shows the channel number which you select manually or the WRE2206
automatically scans and selects.
- Operating Channel This shows the channel number which the WRE2206 is currently using over the
wireless LAN.
- Security Mode This shows the level of wireless security the WRE2206 is using.
- 802.11 Mode This shows the wireless standard.
- WPS This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
- To AP Connection This shows whether the WRE2206 is connected to an AP or not.
System Status
System Up Time This is the total time the WRE2206 has been on.
Current Date/Time This field displays your WRE2206’s present date and time.
System Resource
- CPU Usage This displays what percentage of the WRE2206’s processing ability is currently
used. When this percentage is close to 100%, the WRE2206 is running at full
load, and the throughput is not going to improve anymore. If you want some
applications to have more throughput, you should turn off other applications.
- Memory Usage This shows what percentage of the heap memory the WRE2206 is using.
Interface Status
Interface This displays the WRE2206 port types. The port types are: LAN and WLAN.
Table 6 Status Screen Icon Key (continued)
ICON DESCRIPTION
To Next Page
Loading...
