Chapter 9 Tools
WRE2206 User’s Guide
53
Figure 41 Maintenance > Tools > Configuration
9.4.1 Backup Configuration
Backup configuration allows you to back up (save) the WRE2206’s current configuration to a file on
your computer. Once your WRE2206 is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Click Backup to save the WRE2206’s current configuration to your computer.
9.4.2 Restore Configuration
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your WRE2206.
Note: Do not turn off the WRE2206 while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute before
logging into the WRE2206 again.
The WRE2206 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Table 22 Maintenance Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
To Next Page
Loading...
