WRE2206 User’s Guide 49
CHAPTER 8
System
8.1 Overview
This chapter provides information on the System screen.
8.2 What You Can Do
Use the Password screen to set the password (Section 8.3 on page 49).
8.3 System Password Screen
Use this screen to set the web configurator password. Click Maintenance > System. The following
screen displays.
Figure 36 Maintenance > System > Password
The following table describes the labels in this screen.
Table 20 Maintenance > System > Password
LABEL DESCRIPTION
Password Setup Change your WRE2206’s password (recommended) using the fields as shown.
Old Password Type the default password or the existing password you use to access the system in this
field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the WRE2206.
Reset Click Reset to begin configuring this screen afresh.
To Next Page
Loading...
