Chapter 7 LAN
WRE2206 User’s Guide
48
The following table describes the labels in this screen.
Table 19 Network > LAN > IP
LABEL DESCRIPTION
Get from DHCP
Server
Select this to have the WRE2206 get a dynamic IP address from a DHCP server.
User Defined LAN
IP
Click this to enable the manual IP configuration.
IP Address Type the IP address of your WRE2206 in dotted decimal notation 192.168.1.2 (factory
default).
IP Subnet Mask The subnet mask specifies the network number portion of an IP address.
Apply Click Apply to save your changes back to the WRE2206.
Reset Click Reset to begin configuring this screen afresh.
To Next Page
Loading...
