WRE2206 User’s Guide 56
CHAPTER 10
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• WRE2206 Access and Login
• Internet Access
• Resetting the WRE2206 to Its Factory Defaults
• Wireless Problems
10.1 Power, Hardware Connections, and LEDs
The WRE2206 does not turn on. None of the LEDs turn on.
1 Make sure the WRE2206 is plugged in to an appropriate power source. Make sure the power source
is turned on.
2 Unplug and re-plug the WRE2206.
3 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.3 on page 10.
2 Make sure you understand how the LEDs are enabled or disabled. See Section 9.6 on page 54.
3 Check the hardware connections. See the Quick Start Guide.
4 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
5 Disconnect and re-connect the power adaptor to the WRE2206.
6 If the problem continues, contact the vendor.
To Next Page
Loading...
