ZyXEL Communications WRE2206 - LAN Configuration; Overview; LAN IP Screen Configuration

WRE2206 User’s Guide 47
CHAPTER 7
LAN
7.1 Overview
This screen allows you to assign the WRE2206 a fixed or dynamic IP address. The default IP
address is 192.168.1.2. In initial configuration, the WRE2206 acts as a DHCP server, so it can
assign your computer an IP address in the same network range as the default IP. After the
WRE2206 connects to an AP, the DHCP server function is disabled and your computer gets its IP
from the AP. If the AP connection is dropped, connect to the WRE2206 again using the default
domain name, http://zyxelsetupxxxx where xxxx is the last four numbers of the MAC address. The
MAC address can be found on a label on the product.
7.2 What You Need To Know
The LAN parameters of the WRE2206 are preset in the factory with the following values:
• IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits)
7.3 LAN IP Screen
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 35 Network > LAN > IP