Chapter 9 Tools
WRE2206 User’s Guide
52
Figure 38 Firmware Upgrading
The WRE2206 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 39 Network Temporarily Disconnected
After the WRE2206 restarts, the Upgrade Accomplished screen appears.
Figure 40 Upgrade Accomplished
Refresh the web page and log in again and check your new firmware version in the Status screen.
9.4 Configuration Screen
Click Maintenance > Tools > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
To Next Page
Loading...
