Chapter 10 Multicast Status
WX Series User’s Guide
131
settings in Network Setting > MLD Status. To open this screen, click System Monitor > Multicast Status >
MLD Status.
Figure 67 System Monitor > Multicast Status > MLD Status
The following table describes the labels in this screen.
Table 35 System Monitor > Multicast Status > MLD Status
LABEL DESCRIPTION
Refresh Click this button to update the status on this screen.
Interface This field displays the name of the WX Device’s interface that belongs to an MLD multicast
group.
Multicast Group This field displays the address of the MLD multicast group to which the interface belongs.
To Next Page
Loading...
