EasyManua.ls Logo

ZyXEL Communications WX3401-BO - Ghz MU-MIMO; Multicast (for WX3401-B0 Only)

ZyXEL Communications WX3401-BO
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introduction
WX Series User’s Guide
19
Figure 13 4X4:4 MU-MIMO
1.6 2.4/5 GHz MU-MIMO
The 802.11ac standard supports only downlink traffic on the 5 GHz band while 802.11ax supports both
downlink and uplink connectivity on the 2.4GHz and 5GHz bands.
In a Mesh network, a downlink connection means transmitting data from an AP to a WiFi client. The AP
serves as the transmitter and the WiFi client as the receiver. An uplink connection means transmitting
data from a WiFi client to an AP. An Uplink connection means the AP is the receiver and the WiFi client,
the transmitter.
1.7 Multicast (for WX3401-B0 only)
Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender to 1 recipient)
or Broadcast (1 sender to everybody on the network). Multicast delivers IP packets to a group of hosts
on the network (1 sender to 1 or more recipients).
Table 3 2.4/5GHz MU-MIMO
TYPE 802.11b/g/n 802.11ac 802.11 ax
2.4 GHz
WLAN
Downlink NA NA Y
Uplink NA NA Y
5 GHz WLAN Downlink NA Y Y
Uplink NA N Y

Table of Contents

Related product manuals