ZyXEL Communications WX3401-BO - More Secure (Recommended); No Security

Chapter 7 Wireless
WX Series User’s Guide
96
7.2.1 No Security
Select No Security to allow wireless stations to communicate with the WX Device without any data
encryption or authentication.
Note: If you do not enable any wireless security on your WX Device, your network is accessible
to any wireless networking device that is within range.
Figure 44 Wireless > General: No Security
The following table describes the labels in this screen.
7.2.2 More Secure (Recommended)
The WPA-PSK security mode provides both improved data encryption and user authentication over
WEP. Using a Pre-Shared Key (PSK), both the WX Device and the connecting client share a common
password in order to validate the connection. This type of encryption, while robust, is not as strong as
WPA, WPA2 or even WPA2-PSK. The WPA2-PSK security mode is a newer, more robust version of the WPA
encryption standard. It offers slightly better security, although the use of PSK makes it less robust than it
could be.
Click Network Setting > Wireless to display the General screen. Select More Secure as the security level.
Then select WPA2-PSK, WPA3-SAE or WPA3-SAE/WPA2-PSK from the Security Mode list.
Table 19 Wireless > General: No Security
LABEL DESCRIPTION
Security Level Choose No Security to allow all wireless connections without data encryption or authentication.