Chapter 11 WLAN Station Status
WX Series User’s Guide
133
SNR The Signal-to-Noise Ratio (SNR) is the ratio between the received signal power and the
received noise power.
The normal range is 15 to 40. If the value drops below 15, try moving the associated wireless
station closer to the WX Device to get better quality WiFi.
Level This field displays a number which represents the strength of the WiFi signal between an
associated wireless station and the WX Device. The WX Device uses the RSSI and SNR values to
determine the strength of the WiFi signal.
5 means the WX Device is receiving an excellent WiFi signal.
4 means the WX Device is receiving a very good WiFi signal.
3 means the WX Device is receiving a weak WiFi signal.
2 means the WX Device is receiving a very weak WiFi signal.
1 means the WX Device is not receiving a WiFi signal.
Table 36 System Monitor > WLAN Station Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
