Chapter 2 Hardware
WX Series User’s Guide
24
Link (With a
wired
connection)
Green On The Ethernet cable is connected to the LAN port on the WX
Device.
WiFi Green On The 2.4 G/5 G WiFi is ready.
Blinking The WX Device is transmitting/receiving WiFi data.
Off The 2.4 G/5 G WiFi is disabled.
WPS (for
WX3100-T0
only)
Amber Blinking If you press the WPS button, amber blinking within 120 seconds
means the WPS is in process.
Off The WPS process in done.
Table 6 LED Table (for the WX Device-2)
LED COLOR STATUS DESCRIPTION
POWER
Green On Power is on or the MPro Mesh configuration process is done.
Blinking The WX Device-2 is starting up or under the MPro Mesh
configuration process.
Red On The WX Device-2 detects a system error.
Blinking The WX Device-2 is upgrading firmware
Link (with a
WiFi
connection)
Green On The WiFi connection to the WX Device-1 is good.
Amber On The signal is too strong. We suggest moving the WX Device-2
away from the WX Device-1.
Red On The signal is too weak. Move the WX Device-2 closer to the WX
Device-1.
Link (with a
wired
connection)
Green On The Ethernet cable is connected to the LAN port on the WX
Device-2.
WiFi Green On The 2.4 G/5 G WiFi is ready.
Blinking The WX Device-2 is transmitting/receiving WiFi data.
Off The 2.4 G/5 G WiFi is disabled.
WPS (for
WX3100-T0
only)
Amber Blinking If you press the WPS button, amber blinking within 120 seconds
means the WPS is in process.
Off The WPS process is done.
Table 5 LED Table (for the WX Device-1)
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
