Chapter 6 Connection Status
WX Series User’s Guide
86
Click the Arrow icon ( ) to open the following screen. Use this screen to view more information on the
status of your firewall and interfaces (LAN, and WiFi).
Figure 35 System Info: Detailed Information
Each field is described in the following table.
Table 14 System Info: Detailed Information
LABEL DESCRIPTION
Host Name This field displays the WX Device system name. It is used for identification.
Model Name This shows the model number of your WX Device.
Serial Number This field displays the serial number of the WX Device.
Firmware Version This is the current version of the firmware on the WX Device.
System Uptime This field displays how long the WX Device has been running since it last started up. The WX
Device starts up when you plug it in, when you restart it (Maintenance > Reboot), or when
you reset it.
Interface Status
Virtual ports are shown here. You can see whether the ports are in use and their transmission rate.
LAN Information (These fields display information about the LAN ports.)
IP Address This is the current IPv4 address of the WX Device in the LAN.
Subnet Mask This is the current subnet mask in the LAN.
IPv6 Address This is the current IPv6 address of the WX Device in the LAN.
IPv6 Link Local
Address
This field displays the current link-local address of the WX Device for the LAN interface.
MAC Address This field displays the LAN Ethernet adapter MAC (Media Access Control) address of your WX
Device.
WLAN Information 2.4 G/5 G
To Next Page
Loading...
