Chapter 20 Classifier
XGS-4526/4528F/4728F User’s Guide
202
Click Advanced Application > Classifier in the navigation panel to display the
configuration screen as shown.
Figure 87 Advanced Application > Classifier
The following table describes the labels in this screen.
Table 49 Advanced Application > Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Enter a descriptive name for this rule for identifying purposes.
Packet
Format
Specify the format of the packet. Choices are All, 802.3 tagged, 802.3
untagged, Ethernet II tagged and Ethernet II untagged.
A value of 802.3 indicates that the packets are formatted according to the
IEEE 802.3 standards.
A value of Ethernet II indicates that the packets are formatted according to
RFC 894, Ethernet II encapsulation.
To Next Page
Loading...
