Chapter 6 Tutorials
XGS-4526/4528F/4728F User’s Guide
89
6.6.2 Creating a Private VLAN Rule
Follow the steps below to configure private VLAN for VLAN 123.
1 Click Advanced Application > Private VLAN.
2 In the Private VLAN screen, select Active.
Enter a descriptive name (PrivateVLAN123 for example) in the Name field and
enter 123 in the VLAN ID field.
List the port(s) that can communicate with any port in VLAN 123 (5 in this
example). Then other ports in this VLAN (2, 3 and 4 for example) will be added to
the isolated port list and cannot send traffic to each other.
Click Add.
3 Click the Save link in the upper right corner of the web configurator to save your
configuration permanently.
From port 2, 3, or 4, you should be able to access the device that attachs to port
5, such as a server or default gateway.
To Next Page
Loading...
