Chapter 32 Error Disable
XGS-4526/4528F/4728F User’s Guide
310
32.3 The Error Disable Screen
Use this screen to configure error disable related settings. Click Advanced
Application > Errdisable in the navigation panel to open the following screen.
Figure 148 Advanced Application > Errdisable
32.4 CPU Protection Configuration
Use this screen to limit the maximum number of control packets (ARP, BPDU and/
or IGMP) that the Switch can receive or transmit on a port. Click the Click Here
link next to CPU protection in the Advanced Application > Errdisable screen
to display the screen as shown.
Note: After you configure this screen, make sure you also enable error detection for
the specific control packets in the Advanced Application > Errdisable >
Errdisable Detect screen.
Figure 149 Advanced Application > Errdisable > CPU protection
To Next Page
Loading...
