ZyXEL Communications XGS-4526 - Create a Policy Routing Rule

Chapter 6 Tutorials
XGS-4526/4528F/4728F User’s Guide
91
3 Click Add to save the settings to the run-time memory.
6.7.2 Create a Policy Routing Rule
Follow the steps below to set up a policy routing profile first and then a rule to
forward traffic of classifier DSCP58 to gateway R2.
1 Click IP Application > Policy Routing.
2 Select Active and enter a descriptive name for this profile (“To_R2” for example).
Click Add to save the settings to the run-time memory.