Chapter 26 IP Source Guard
XGS-4526/4528F/4728F User’s Guide
271
26.5.1 DHCP Snooping Port Configure
Use this screen to specify whether ports are trusted or untrusted ports for DHCP
snooping.
Note: The Switch will drop all DHCP requests if you enable DHCP snooping and there
are no trusted ports.
You can also specify the maximum number for DHCP packets that each port
(trusted or untrusted) can receive each second. To open this screen, click
Advanced Application > IP Source Guard > DHCP Snooping > Configure >
Port.
Figure 121 DHCP Snooping Port Configure
To Next Page
Loading...
