ZyAIR B-3000 Intelligent Wireless LAN Access Point
20
Click ADVANCED, WIRELESS and then the Wireless tab. Select Bridge in the Operating Mode drop-
down list box to display the screen as shown.
Figure 7 Wireless : Bridge
The following table describes the bridge fields in this screen.
Table 6 Wireless : Bridge
LABEL DESCRIPTION
Operating Mode
Select Bridge in this field to display the screen as shown in Figure 7.
Peer Bridge
MAC Address
Type the MAC address in valid MAC address format, that is, six hexadecimal
character pairs, for example, 12:34:56:78:9a:bc.
To Next Page
Loading...
