Chapter 2 How to Set Up Your Network
ZyWALL USG 20-2000 User’s Guide
31
2.2.2 Configure Port Roles
Here is how to take the P5 port from the lan2 interface and add it to the dmz interface.
1 Click Configuration > Network > Interface > Port Role.
2 Under P5 select the dmz (DMZ) radio button and click Apply.
2.2.3 Configure Zones
In this example you have created a WIZ_VPN tunnel through the Quick Setup - VPN Setup
wizard. By default, it is assigned to the IPSec_VPN zone. Do the following to move WIZ_VPN
from the IPSec_VPN zone to a new zone.
1 Click Configuration > Network > Zone and then double-click the IPSec_VPN entry.
2 Select WIZ_VPN and remove it from the Member box and click OK.
To Next Page
Loading...
