Chapter 2 How to Set Up Your Network
ZyWALL USG 20-2000 User’s Guide
35
2 Edit this screen as follows.
A (internal) name for the WLAN interface displays. You can modify it if you want to.
The ZyWALL’s security settings are configured by zones. Select to which security zone you want the
WLAN interface to belong (the WLAN zone in this example). This determines which security settings
the ZyWALL applies to the WLAN interface.
Configure the SSID (ZYXEL_WPA in this example).
If all of your wireless clients support WPA2, select WPA2-Enterprise as the Security Type,
otherwise select WPA/WPA-2-Enterprise. Set the Authentication Type to Auth Method. The
ZyWALL can use its default authentication method (the local user database) and its default
certificate to authenticate the users.
Configure the interface’s IP address and set it to DHCP Server. Click OK.
3 Turn on the wireless LAN and click Apply.
To Next Page
Loading...
